To create the plain wood tags:Make the tags using scrap wood or purchase lattice or lath pieces from a home store. They are about 1-1/2″ wide x 1/4′ thick.
Use a miter saw (or miter box with a hand saw) to cut the wood into 3-4″ lengths (mine average 3-1/2″). Tip: have the blade running before touching the wood and then cut slowly.
Using a shipping tag as a guide, trace the angles with a pencil.
Set the miter saw at a 45 degree angle and cut off the corners at the marks.
Drill a hole in the top using a large enough drill bit to put jute twine though later.
Sand the edges using 150 to 220 grit sandpaper
Check it out…
>> Wood Tags Three Ways << image source: anoregoncottage.com
Drink THIS Green Powder Every Morning (It Will Be The Best Decision You Ever Make!)
- Having more energy than you thought possible
- Not being so dang hungry all the time
- Feeling strong
- Sleeping like a baby
- Finally shifting that stubborn fat
It cleanses your body from the inside out... detoxifying... de-stressing... naturally and effortlessly melting away stubborn layers of fat. Just stir a spoonful into a glass of water in the morning and experience the best health ever!